Caring for your tyres is an important part of driving safely wherever you live. Whether you drive on busy roads like those in Greater Manchester, Leeds, Fife Dunfermline or London, the constant braking and accelerating you will need to do will put your tyres under more pressure than in other parts of the country where the traffic isn’t as intense. What are the car tyre safety tips you should be following?
Look For Bumps
Bumps and bulging sections of rubber can appear on the sides of tyres almost as though they have developed a disease. In fact, what this means is that the rubber the tyres are made from is starting to come apart. As a result, you could suffer from a dangerous blowout on the motorway or even when your car is stationary. Tyres with sidewall bumps should be replaced without any further delay.
Confirm Your Tread Depth
If your tyres are street legal, then they will have to have sufficient depth all the way around them. This does not mean you can inspect them in one place and think everything is fine, however. Confirm you have sufficient depth in your remaining tread with a tyre gauge at several locations around each one. This will necessarily mean moving your car back and forth so you can get to the underside, of course. Those which are balding or approaching the end of their lives should be exchanged. Fife Autocentre is a reliable tyre garage that provides long-lasting tyres in Dunfermline and nearby areas. For Leeds & Manchester there are many local garages and you can choose a garage after checking their customer reviews.
Check the Air Pressure
Finally, it is essential that you check the level of inflation each tyre has every thousand miles or so. Make it a job you do at the garage every third time you fill up with fuel because you may be surprised how flat your tyres have become. When they’re flattened, they don’t grip the road so well making cornering and braking harder. Equally, over-inflated tyres are dangerous and need to be pumped up to the recommended level. Gently push on the valve until you have lowered the air pressure enough and then pump them up to the correct setting.
For more information, you can visit the website here.